---

Kirkham 427 Manual	Table of Contents

---

Shift Boot

Parts:

• shift ring
• shift boot
• sheet metal screws (4)

Tools:

• 1/8” drill bit & drill
• phillips head screwdriver

top view as if from standing on the hood.

fully installed.

1. Orient the chrome ring, and mark the holes.
2. Drill the first 1/8” hole, trying to be as exact as possible.
3. Replace and install the first screw.
4. Drill the second hole.
5. Install the second screw.
6. Repeat for the other two holes.
7. Remove screws and trim ring,
8. Clean the chips.
9. Align holes in boot with screw holes.
10. Reinstall the ring on top of the boot.
11. Poke screws through rubber-covered holes in boot.
12. Tighten screws.

---

Back one page
Req. from 38.103.63.59 on Thursday, 20-Nov-2008 08:45:05 GMT
Change date: Monday, 02-Jul-2007 21:00:52 MDT
Kirkham Motorsports - Ph: 801-377-8224 - sales@kirkhammotorsports.com
Copyright © Kirkham Motorsports